diff --git a/infra/finance/0000_proxmox_playbook.yaml b/infra/finance/0000_proxmox_playbook.yaml
new file mode 100644
index 0000000..5839aba
--- /dev/null
+++ b/infra/finance/0000_proxmox_playbook.yaml
@@ -0,0 +1,112 @@
+- name: Provision finance Proxmox VM
+  hosts: finance
+  connection: ansible.builtin.local
+  gather_facts: false
+  vars:
+    api_user: "{{ lookup('ansible.builtin.env', 'PROXMOX_USER') }}"
+    api_host: "{{ lookup('ansible.builtin.env', 'PROXMOX_HOST' ) }}"
+    api_token_id: "{{ lookup('ansible.builtin.env', 'PROXMOX_TOKEN_ID') }}"
+    api_token_secret: "{{ lookup('ansible.builtin.env', 'PROXMOX_TOKEN_SECRET') }}"
+    ssh_public: "{{ lookup('ansible.builtin.env', 'SSH_PUBLIC') }}"
+    vmname: "{{ inventory_hostname | regex_replace('^([^\\.]+)\\..+$', '\\1') }}"
+    node: pve2
+  module_defaults:
+    community.general.proxmox_kvm:
+      api_user: "{{ api_user }}"
+      api_host: "{{ api_host }}"
+      api_token_id: "{{ api_token_id }}"
+      api_token_secret: "{{ api_token_secret }}"
+      name: "{{ vmname }}"
+      node: "{{ node }}"
+    community.general.proxmox_nic:
+      api_user: "{{ api_user }}"
+      api_host: "{{ api_host }}"
+      api_token_id: "{{ api_token_id }}"
+      api_token_secret: "{{ api_token_secret }}"
+      name: "{{ vmname }}"
+    community.general.proxmox_disk:
+      api_user: "{{ api_user }}"
+      api_host: "{{ api_host }}"
+      api_token_id: "{{ api_token_id }}"
+      api_token_secret: "{{ api_token_secret }}"
+      name: "{{ vmname }}"
+  tasks:
+    # Initial setup
+    - name: Create VM
+      community.general.proxmox_kvm:
+        clone: "{{ node }}-debian-12"
+        storage: nvme
+      notify: Initial boot
+    - name: Wait for status
+      community.general.proxmox_kvm:
+        state: current
+      register: vm
+      retries: 30
+      delay: 10
+      until: vm.status is defined
+
+    # Networking and initial config
+    - name: Add PUB NIC
+      community.general.proxmox_nic:
+        interface: net0
+        firewall: false
+        bridge: PUB
+    - name: Add SRV NIC
+      community.general.proxmox_nic:
+        interface: net1
+        firewall: false
+        bridge: SRV
+    - name: Configure cloud-init
+      community.general.proxmox_kvm:
+        update: true
+        ciuser: debian
+        sshkeys: "{{ ssh_public }}"
+        ipconfig:
+          ipconfig0: ip=dhcp,ip6=auto
+          ipconfig1: ip=dhcp
+
+    - name: Force all notified handlers to run
+      ansible.builtin.meta: flush_handlers
+
+    # VM Configuration
+    - name: Resize root disk
+      community.general.proxmox_disk:
+        disk: scsi0
+        size: 16G
+        state: resized
+    - name: Create data disk
+      community.general.proxmox_disk:
+        disk: scsi1
+        backup: true
+        storage: nvme
+        size: 64
+    - name: Update VM
+      community.general.proxmox_kvm:
+        update: true
+        agent: enabled=1
+        tags:
+          - debian-12
+          - managed
+        onboot: true
+        cores: 4
+        memory: 8192
+
+    - name: Retart VM
+      community.general.proxmox_kvm:
+        state: restarted
+        timeout: 60
+  handlers:
+    # Initial boot
+    # For some reason debian cloud images don't use
+    # cloud-init for networking on first boot (cloud-init files
+    # are regenerated AFTER networking starts). But we need the
+    # hostname to be registered with DHCP later on so ¯\_(ツ)_/¯
+    - name: Initial boot
+      block:
+        - name: Start
+          community.general.proxmox_kvm:
+            state: started
+          register: start
+        - name: Wait 1.5 min # Initial apt update, apt upgrade, cloud-init
+          ansible.builtin.wait_for:
+            timeout: 90
diff --git a/infra/finance/0001_initialise_playbook.yaml b/infra/finance/0001_initialise_playbook.yaml
new file mode 100644
index 0000000..e6dc182
--- /dev/null
+++ b/infra/finance/0001_initialise_playbook.yaml
@@ -0,0 +1,42 @@
+- name: Initialise VM
+  hosts: finance
+  gather_facts: false
+  tasks:
+    - name: Wait for connection
+      ansible.builtin.wait_for_connection:
+        timeout: 300
+    - name: Install system packages
+      ansible.builtin.apt:
+        update_cache: true
+        pkg:
+          - qemu-guest-agent
+          - parted
+      become: true
+    - name: Enable qemu-guest-agent
+      ansible.builtin.systemd:
+        name: qemu-guest-agent
+        state: started
+        enabled: true
+      become: true
+
+    - name: Create data partition
+      community.general.parted:
+        device: /dev/disk/by-path/pci-0000:00:05.0-scsi-0:0:0:1
+        label: gpt
+        name: data
+        number: 1
+        state: present
+      become: true
+    - name: Create data filesystem
+      community.general.filesystem:
+        dev: /dev/disk/by-path/pci-0000:00:05.0-scsi-0:0:0:1-part1
+        fstype: ext4
+      become: true
+    - name: Mount data partition
+      ansible.posix.mount:
+        src: /dev/disk/by-path/pci-0000:00:05.0-scsi-0:0:0:1-part1
+        path: /var/lib/docker
+        fstype: ext4
+        opts: rw,errors=remount-ro,x-systemd.growfs
+        state: mounted
+      become: true
diff --git a/infra/finance/0002_docker_playbook.yaml b/infra/finance/0002_docker_playbook.yaml
new file mode 100644
index 0000000..b9e33c4
--- /dev/null
+++ b/infra/finance/0002_docker_playbook.yaml
@@ -0,0 +1,47 @@
+- name: Install docker
+  hosts: finance
+  gather_facts: false
+  tasks:
+    - name: Wait for connection
+      ansible.builtin.wait_for_connection:
+        timeout: 300
+    - name: Install dependencies
+      ansible.builtin.apt:
+        update_cache: true
+        pkg:
+          - curl
+          - python3-apt
+          - gpg
+      become: true
+    - name: Add docker key
+      ansible.builtin.apt_key:
+        url: https://download.docker.com/linux/debian/gpg
+        keyring: /etc/apt/keyrings/docker.gpg
+      become: true
+    - name: Add docker repo
+      ansible.builtin.apt_repository:
+        repo: deb [arch=amd64 signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/debian bookworm stable
+      become: true
+    - name: Install docker
+      ansible.builtin.apt:
+        update_cache: true
+        pkg:
+          - docker-ce
+          - docker-ce-cli
+          - containerd.io
+          - docker-buildx-plugin
+          - docker-compose-plugin
+      become: true
+    - name: Add user to docker group
+      ansible.builtin.user:
+        user: debian
+        groups:
+          - docker
+        append: true
+      become: true
+    - name: Enable docker
+      ansible.builtin.systemd:
+        name: docker
+        state: started
+        enabled: true
+      become: true
diff --git a/infra/finance/0003_firefly-iii_playbook.yaml b/infra/finance/0003_firefly-iii_playbook.yaml
new file mode 100644
index 0000000..1fc3ef2
--- /dev/null
+++ b/infra/finance/0003_firefly-iii_playbook.yaml
@@ -0,0 +1,59 @@
+- name: Deploy app
+  hosts: finance
+  gather_facts: false
+  vars:
+    app: firefly-iii
+  tasks:
+    - name: Wait for connection
+      ansible.builtin.wait_for_connection:
+        timeout: 300
+    - name: Docker compose down
+      community.docker.docker_compose_v2:
+        project_src: "$HOME/{{ app }}"
+        state: absent
+    - name: Copy project
+      ansible.builtin.copy:
+        src: "./{{ app }}"
+        dest: "$HOME"
+        mode: "0744"
+
+    - name: Replace APP_KEY secret
+      ansible.builtin.replace:
+        path: "$HOME/{{ app }}/.env"
+        regexp: "APP_KEY_VALUE"
+        replace: "{{ lookup('infisical.vault.read_secrets', env_slug='prod', path='/finance', secret_name='APP_KEY')['value'] }}"
+    - name: Replace DB secret
+      ansible.builtin.replace:
+        path: "$HOME/{{ app }}/.env"
+        regexp: "DB_PASSWORD_VALUE"
+        replace: "{{ lookup('infisical.vault.read_secrets', env_slug='prod', path='/finance', secret_name='DB_PASSWORD')['value'] }}"
+    - name: Replace cron token secret
+      ansible.builtin.replace:
+        path: "$HOME/{{ app }}/.env"
+        regexp: "STATIC_CRON_TOKEN_VALUE"
+        replace: "{{ lookup('infisical.vault.read_secrets', env_slug='prod', path='/finance', secret_name='STATIC_CRON_TOKEN')['value'] }}"
+    - name: Replace SMTP Password secret (app)
+      ansible.builtin.replace:
+        path: "$HOME/{{ app }}/.env"
+        regexp: "SMTP_PASSWORD_VALUE"
+        replace: "{{ lookup('ansible.builtin.env', 'SMTP_PASSWORD') }}"
+
+    - name: Replace Nordigen ID secret
+      ansible.builtin.replace:
+        path: "$HOME/{{ app }}/.importer.env"
+        regexp: "NORDIGEN_ID_VALUE"
+        replace: "{{ lookup('infisical.vault.read_secrets', env_slug='prod', path='/finance', secret_name='NORDIGEN_ID')['value'] }}"
+    - name: Replace Nordigen Key secret
+      ansible.builtin.replace:
+        path: "$HOME/{{ app }}/.importer.env"
+        regexp: "NORDIGEN_KEY_VALUE"
+        replace: "{{ lookup('infisical.vault.read_secrets', env_slug='prod', path='/finance', secret_name='NORDIGEN_KEY')['value'] }}"
+    - name: Replace SMTP Password secret (importer)
+      ansible.builtin.replace:
+        path: "$HOME/{{ app }}/.importer.env"
+        regexp: "SMTP_PASSWORD_VALUE"
+        replace: "{{ lookup('ansible.builtin.env', 'SMTP_PASSWORD') }}"
+
+    - name: Docker compose up -d
+      community.docker.docker_compose_v2:
+        project_src: "$HOME/{{ app }}"
diff --git a/infra/finance/firefly-iii/.env b/infra/finance/firefly-iii/.env
new file mode 100644
index 0000000..703964f
--- /dev/null
+++ b/infra/finance/firefly-iii/.env
@@ -0,0 +1,349 @@
+# You can leave this on "local". If you change it to production most console commands will ask for extra confirmation.
+# Never set it to "testing".
+APP_ENV=production
+
+# Set to true if you want to see debug information in error screens.
+APP_DEBUG=false
+
+# This should be your email address.
+# If you use Docker or similar, you can set this variable from a file by using SITE_OWNER_FILE
+# The variable is used in some errors shown to users who aren't admin.
+SITE_OWNER=gleb@koval.net
+
+# The encryption key for your sessions. Keep this very secure.
+# Change it to a string of exactly 32 chars or use something like `php artisan key:generate` to generate it.
+# If you use Docker or similar, you can set this variable from a file by using APP_KEY_FILE
+#
+# Avoid the "#" character in your APP_KEY, it may break things.
+#
+APP_KEY=APP_KEY_VALUE
+
+# Firefly III will launch using this language (for new users and unauthenticated visitors)
+# For a list of available languages: https://github.com/firefly-iii/firefly-iii/tree/main/resources/lang
+#
+# If text is still in English, remember that not everything may have been translated.
+DEFAULT_LANGUAGE=en_GB
+
+# The locale defines how numbers are formatted.
+# by default this value is the same as whatever the language is.
+DEFAULT_LOCALE=equal
+
+# Change this value to your preferred time zone.
+# Example: Europe/Amsterdam
+# For a list of supported time zones, see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
+TZ=Europe/London
+
+# TRUSTED_PROXIES is a useful variable when using Docker and/or a reverse proxy.
+# Set it to ** and reverse proxies work just fine.
+TRUSTED_PROXIES=10.4.0.1
+
+# The log channel defines where your log entries go to.
+# Several other options exist. You can use 'single' for one big fat error log (not recommended).
+# Also available are 'syslog', 'errorlog' and 'stdout' which will log to the system itself.
+# A rotating log option is 'daily', creates 5 files that (surprise) rotate.
+# A cool option is 'papertrail' for cloud logging
+# Default setting 'stack' will log to 'daily' and to 'stdout' at the same time.
+LOG_CHANNEL=stack
+
+# Log level. You can set this from least severe to most severe:
+# debug, info, notice, warning, error, critical, alert, emergency
+# If you set it to debug your logs will grow large, and fast. If you set it to emergency probably
+# nothing will get logged, ever.
+APP_LOG_LEVEL=notice
+
+# Audit log level.
+# The audit log is used to log notable Firefly III events on a separate channel.
+# These log entries may contain sensitive financial information.
+# The audit log is disabled by default.
+#
+# To enable it, set AUDIT_LOG_LEVEL to "info"
+# To disable it, set AUDIT_LOG_LEVEL to "emergency"
+AUDIT_LOG_LEVEL=emergency
+
+#
+# If you want, you can redirect the audit logs to another channel.
+# Set 'audit_stdout', 'audit_syslog', 'audit_errorlog' to log to the system itself.
+# Use audit_daily to log to a rotating file.
+# Use audit_papertrail to log to papertrail.
+#
+# If you do this, the audit logs may be mixed with normal logs because the settings for these channels
+# are often the same as the settings for the normal logs.
+AUDIT_LOG_CHANNEL=
+
+#
+# Used when logging to papertrail:
+# Also used when audit logs log to papertrail:
+#
+PAPERTRAIL_HOST=
+PAPERTRAIL_PORT=
+
+# Database credentials. Make sure the database exists. I recommend a dedicated user for Firefly III
+# For other database types, please see the FAQ: https://docs.firefly-iii.org/references/faq/install/#i-want-to-use-sqlite
+# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
+# Use "pgsql" for PostgreSQL
+# Use "mysql" for MySQL and MariaDB.
+# Use "sqlite" for SQLite.
+DB_CONNECTION=mysql
+DB_HOST=db
+DB_PORT=3306
+DB_DATABASE=firefly
+DB_USERNAME=firefly
+DB_PASSWORD=DB_PASSWORD_VALUE
+# leave empty or omit when not using a socket connection
+DB_SOCKET=
+
+# MySQL supports SSL. You can configure it here.
+# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
+MYSQL_USE_SSL=false
+MYSQL_SSL_VERIFY_SERVER_CERT=true
+# You need to set at least of these options
+MYSQL_SSL_CAPATH=/etc/ssl/certs/
+MYSQL_SSL_CA=
+MYSQL_SSL_CERT=
+MYSQL_SSL_KEY=
+MYSQL_SSL_CIPHER=
+
+# PostgreSQL supports SSL. You can configure it here.
+# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
+PGSQL_SSL_MODE=prefer
+PGSQL_SSL_ROOT_CERT=null
+PGSQL_SSL_CERT=null
+PGSQL_SSL_KEY=null
+PGSQL_SSL_CRL_FILE=null
+
+# more PostgreSQL settings
+PGSQL_SCHEMA=public
+
+# If you're looking for performance improvements, you could install memcached or redis
+CACHE_DRIVER=file
+SESSION_DRIVER=file
+
+# If you set either of the options above to 'redis', you might want to update these settings too
+# If you use Docker or similar, you can set REDIS_HOST_FILE, REDIS_PASSWORD_FILE or
+# REDIS_PORT_FILE to set the value from a file instead of from an environment variable
+
+# can be tcp or unix. http is not supported
+REDIS_SCHEME=tcp
+
+# use only when using 'unix' for REDIS_SCHEME. Leave empty otherwise.
+REDIS_PATH=
+
+# use only when using 'tcp' or 'http' for REDIS_SCHEME. Leave empty otherwise.
+REDIS_HOST=127.0.0.1
+REDIS_PORT=6379
+
+# Use only with Redis 6+ with proper ACL set. Leave empty otherwise.
+REDIS_USERNAME=
+REDIS_PASSWORD=
+
+# always use quotes and make sure redis db "0" and "1" exists. Otherwise change accordingly.
+REDIS_DB="0"
+REDIS_CACHE_DB="1"
+
+# Cookie settings. Should not be necessary to change these.
+# If you use Docker or similar, you can set COOKIE_DOMAIN_FILE to set
+# the value from a file instead of from an environment variable
+# Setting samesite to "strict" may give you trouble logging in.
+COOKIE_PATH="/"
+COOKIE_DOMAIN=
+COOKIE_SECURE=false
+COOKIE_SAMESITE=lax
+
+# If you want Firefly III to email you, update these settings
+# For instructions, see: https://docs.firefly-iii.org/how-to/firefly-iii/advanced/notifications/#email
+# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
+MAIL_MAILER=smtp
+MAIL_HOST=mx.koval.net
+MAIL_PORT=587
+MAIL_FROM=no-reply@koval.net
+MAIL_USERNAME=no-reply@koval.net
+MAIL_PASSWORD=SMTP_PASSWORD_VALUE
+MAIL_ENCRYPTION=tls
+MAIL_SENDMAIL_COMMAND=
+
+# Other mail drivers:
+# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
+MAILGUN_DOMAIN=
+MAILGUN_SECRET=
+
+# If you are on EU region in mailgun, use api.eu.mailgun.net, otherwise use api.mailgun.net
+# If you use Docker or similar, you can set this variable from a file by appending it with _FILE
+MAILGUN_ENDPOINT=api.mailgun.net
+
+# If you use Docker or similar, you can set these variables from a file by appending them with _FILE
+MANDRILL_SECRET=
+SPARKPOST_SECRET=
+
+# Firefly III can send you the following messages.
+SEND_ERROR_MESSAGE=true
+
+# These messages contain (sensitive) transaction information:
+SEND_REPORT_JOURNALS=true
+
+# Set this value to true if you want to set the location of certain things, like transactions.
+# Since this involves an external service, it's optional and disabled by default.
+ENABLE_EXTERNAL_MAP=false
+
+#
+# Enable or disable exchange rate conversion. This function isn't used yet by Firefly III
+#
+ENABLE_EXCHANGE_RATES=false
+
+# Set this value to true if you want Firefly III to download currency exchange rates
+# from the internet. These rates are hosted by the creator of Firefly III inside
+# an Azure Storage Container.
+# Not all currencies may be available. Rates may be wrong.
+ENABLE_EXTERNAL_RATES=true
+
+# The map will default to this location:
+MAP_DEFAULT_LAT=51
+MAP_DEFAULT_LONG=0
+MAP_DEFAULT_ZOOM=6
+
+#
+# Some objects have room for an URL, like transactions and webhooks.
+# By default, the following protocols are allowed:
+# http, https, ftp, ftps, mailto
+#
+# To change this, set your preferred comma separated set below.
+# Be sure to include http, https and other default ones if you need to.
+#
+VALID_URL_PROTOCOLS=
+
+#
+# Firefly III authentication settings
+#
+
+#
+# Firefly III supports a few authentication methods:
+# - 'web' (default, uses built in DB)
+# - 'remote_user_guard' for Authelia etc
+# Read more about these settings in the documentation.
+# https://docs.firefly-iii.org/how-to/firefly-iii/advanced/authentication/
+#
+# LDAP is no longer supported :(
+#
+AUTHENTICATION_GUARD=web
+
+#
+# Remote user guard settings
+#
+AUTHENTICATION_GUARD_HEADER=REMOTE_USER
+AUTHENTICATION_GUARD_EMAIL=
+
+#
+# Firefly III generates a basic keypair for your OAuth tokens.
+# If you want, you can overrule the key with your own (secure) value.
+# It's also possible to set PASSPORT_PUBLIC_KEY_FILE or PASSPORT_PRIVATE_KEY_FILE
+# if you're using Docker secrets or similar solutions for secret management
+#
+PASSPORT_PRIVATE_KEY=
+PASSPORT_PUBLIC_KEY=
+
+#
+# Extra authentication settings
+#
+CUSTOM_LOGOUT_URL=
+
+# You can disable the X-Frame-Options header if it interferes with tools like
+# Organizr. This is at your own risk. Applications running in frames run the risk
+# of leaking information to their parent frame.
+DISABLE_FRAME_HEADER=false
+
+# You can disable the Content Security Policy header when you're using an ancient browser
+# or any version of Microsoft Edge / Internet Explorer (which amounts to the same thing really)
+# This leaves you with the risk of not being able to stop XSS bugs should they ever surface.
+# This is at your own risk.
+DISABLE_CSP_HEADER=false
+
+# If you wish to track your own behavior over Firefly III, set valid analytics tracker information here.
+# Nobody uses this except for me on the demo site. But hey, feel free to use this if you want to.
+# Do not prepend the TRACKER_URL with http:// or https://
+# The only tracker supported is Matomo.
+# You can set the following variables from a file by appending them with _FILE:
+TRACKER_SITE_ID=
+TRACKER_URL=
+
+#
+# Firefly III supports webhooks. These are security sensitive and must be enabled manually first.
+#
+ALLOW_WEBHOOKS=false
+
+#
+# The static cron job token can be useful when you use Docker and wish to manage cron jobs.
+# 1. Set this token to any 32-character value (this is important!).
+# 2. Use this token in the cron URL instead of a user's command line token that you can find in /profile
+#
+# For more info: https://docs.firefly-iii.org/how-to/firefly-iii/advanced/cron/
+#
+# You can set this variable from a file by appending it with _FILE
+#
+STATIC_CRON_TOKEN=STATIC_CRON_TOKEN_VALUE
+
+# You can fine tune the start-up of a Docker container by editing these environment variables.
+# Use this at your own risk. Disabling certain checks and features may result in lots of inconsistent data.
+# However if you know what you're doing you can significantly speed up container start times.
+# Set each value to true to enable, or false to disable.
+
+# Set this to true to build all locales supported by Firefly III.
+# This may take quite some time (several minutes) and is generally not recommended.
+# If you wish to change or alter the list of locales, start your Docker container with
+# `docker run -v locale.gen:/etc/locale.gen -e DKR_BUILD_LOCALE=true`
+# and make sure your preferred locales are in your own locale.gen.
+DKR_BUILD_LOCALE=false
+
+# Check if the SQLite database exists. Can be skipped if you're not using SQLite.
+# Won't significantly speed up things.
+DKR_CHECK_SQLITE=true
+
+# Run database creation and migration commands. Disable this only if you're 100% sure the DB exists
+# and is up to date.
+DKR_RUN_MIGRATION=true
+
+# Run database upgrade commands. Disable this only when you're 100% sure your DB is up-to-date
+# with the latest fixes (outside of migrations!)
+DKR_RUN_UPGRADE=true
+
+# Verify database integrity. Includes all data checks and verifications.
+# Disabling this makes Firefly III assume your DB is intact.
+DKR_RUN_VERIFY=true
+
+# Run database reporting commands. When disabled, Firefly III won't go over your data to report current state.
+# Disabling this should have no impact on data integrity or safety but it won't warn you of possible issues.
+DKR_RUN_REPORT=true
+
+# Generate OAuth2 keys.
+# When disabled, Firefly III won't attempt to generate OAuth2 Passport keys. This won't be an issue, IFF (if and only if)
+# you had previously generated keys already and they're stored in your database for restoration.
+DKR_RUN_PASSPORT_INSTALL=true
+
+# Leave the following configuration vars as is.
+# Unless you like to tinker and know what you're doing.
+APP_NAME=FireflyIII
+BROADCAST_DRIVER=log
+QUEUE_DRIVER=sync
+CACHE_PREFIX=firefly
+PUSHER_KEY=
+IPINFO_TOKEN=
+PUSHER_SECRET=
+PUSHER_ID=
+DEMO_USERNAME=
+DEMO_PASSWORD=
+
+#
+# The v2 layout is very experimental. If it breaks you get to keep both parts.
+# Be wary of data loss.
+#
+FIREFLY_III_LAYOUT=v1
+
+#
+# Please make sure this URL matches the external URL of your Firefly III installation.
+# It is used to validate specific requests and to generate URLs in emails.
+#
+APP_URL=https://finance.koval.net
+
+# MySQL
+MYSQL_RANDOM_ROOT_PASSWORD=yes
+MYSQL_USER=$DB_USERNAME
+MYSQL_PASSWORD=$DB_PASSWORD
+MYSQL_DATABASE=$DB_DATABASE
diff --git a/infra/finance/firefly-iii/.gitignore b/infra/finance/firefly-iii/.gitignore
new file mode 100644
index 0000000..fab02bf
--- /dev/null
+++ b/infra/finance/firefly-iii/.gitignore
@@ -0,0 +1 @@
+!*.env
diff --git a/infra/finance/firefly-iii/.importer.env b/infra/finance/firefly-iii/.importer.env
new file mode 100644
index 0000000..82b02c9
--- /dev/null
+++ b/infra/finance/firefly-iii/.importer.env
@@ -0,0 +1,255 @@
+# Firefly Data Importer (FIDI) configuration file
+
+# Where is Firefly III?
+#
+# 1) Make sure you ADD http:// or https://
+# 2) Make sure you REMOVE any trailing slash from the end of the URL.
+# 3) In case of Docker, refer to the internal IP of your Firefly III installation.
+#
+# Setting this value is not mandatory. But it is very useful.
+#
+# This variable can be set from a file if you append it with _FILE
+#
+FIREFLY_III_URL=http://app:8080
+
+#
+# Imagine Firefly III can be reached at "http://172.16.0.2:8082" (internal Docker network or something).
+# But you have a fancy URL: "https://personal-finances.bill.microsoft.com/"
+#
+# In those cases, you can overrule the URL so when the data importer links back to Firefly III, it uses the correct URL.
+#
+# 1) Make sure you ADD http:// or https://
+# 2) Make sure you REMOVE any trailing slash from the end of the URL.
+#
+# IF YOU SET THIS VALUE, YOU MUST ALSO SET THE FIREFLY_III_URL
+#
+# This variable can be set from a file if you append it with _FILE
+#
+VANITY_URL=https://finance.koval.net
+
+#
+# Set your Firefly III Personal Access Token (OAuth)
+# You can create a Personal Access Token on the /profile page:
+# go to the OAuth tab, then Personal Access Token and "Create token".
+#
+# - Do not use the "command line token". That's the WRONG one.
+# - Do not use "APP_KEY" value from your Firefly III installation. That's the WRONG one.
+#
+# Setting this value is not mandatory. Instructions will follow if you omit this field.
+#
+# This variable can be set from a file if you append it with _FILE
+#
+FIREFLY_III_ACCESS_TOKEN=
+
+#
+# You can also use a public client ID. This is available in Firefly III 5.4.0-alpha.3 and higher.
+# This is a number (1, 2, 3). If you use the client ID, you can leave the access token empty and vice versa.
+#
+# This value is not mandatory to set. Instructions will follow if you omit this field.
+#
+# This variable can be set from a file if you append it with _FILE
+#
+FIREFLY_III_CLIENT_ID=
+
+#
+# Nordigen information.
+# The key and ID can be set from a file if you append it with _FILE
+#
+NORDIGEN_ID=NORDIGEN_ID_VALUE
+NORDIGEN_KEY=NORDIGEN_KEY_VALUE
+NORDIGEN_SANDBOX=false
+
+#
+# Spectre information
+#
+# The ID and secret can be set from a file if you append it with _FILE
+SPECTRE_APP_ID=
+SPECTRE_SECRET=
+
+#
+# Use cache. No need to do this.
+#
+USE_CACHE=false
+
+#
+# If set to true, the data import will not complain about running into duplicates.
+# This will give you cleaner import mails if you run regular imports.
+#
+# This means that the data importer will not import duplicates, but it will not complain about them either.
+#
+# This setting has no influence on the settings in your configuration(.json).
+#
+# Of course, if something goes wrong *because* the transaction is a duplicate you will
+# NEVER know unless you start digging in your log files. So be careful with this.
+#
+IGNORE_DUPLICATE_ERRORS=false
+
+#
+# Auto import settings. Due to security constraints, you MUST enable each feature individually.
+# You must also set a secret. The secret is used for the web routes.
+#
+# The auto-import secret must be a string of at least 16 characters.
+# Visit this page for inspiration: https://www.random.org/passwords/?num=1&len=16&format=html&rnd=new
+#
+# Submit it using ?secret=X
+#
+# This variable can be set from a file if you append it with _FILE
+#
+AUTO_IMPORT_SECRET=
+
+#
+# Is the /autoimport even endpoint enabled?
+# By default it's disabled, and the secret alone will not enable it.
+#
+CAN_POST_AUTOIMPORT=false
+
+#
+# Is the /autoupload endpoint enabled?
+# By default it's disabled, and the secret alone will not enable it.
+#
+CAN_POST_FILES=false
+
+#
+# Import directory white list. You need to set this before the auto importer will accept a directory to import from.
+#
+# This variable can be set from a file if you append it with _FILE
+#
+IMPORT_DIR_ALLOWLIST=
+
+#
+# If you import from a directory, you can save a fallback configuration file in the directory.
+# This file must be called "_fallback.json" and will be used when your CSV or CAMT.053 file is not accompanied
+# by a configuration file.
+#
+# This fallback configuration will only be used if this variable is set to true.
+# https://docs.firefly-iii.org/how-to/data-importer/advanced/post/#importing-a-local-directory
+#
+FALLBACK_IN_DIR=false
+
+#
+# When you're running Firefly III under a (self-signed) certificate,
+# the data importer may have trouble verifying the TLS connection.
+#
+# You have a few options to make sure the data importer can connect
+# to Firefly III:
+# - 'true': will verify all certificates. The most secure option and the default.
+# - 'file.pem': refer to a file (you must provide it) to your custom root or intermediate certificates.
+# - 'false': will verify NO certificates. Not very secure.
+VERIFY_TLS_SECURITY=true
+
+#
+# If you want, you can set a directory here where the data importer will look for import configurations.
+# This is a separate setting from the /import directory that the auto-import uses.
+# Setting this variable isn't necessary. The default value is "storage/configurations".
+#
+# This variable can be set from a file if you append it with _FILE
+#
+JSON_CONFIGURATION_DIR=
+
+#
+# Time out when connecting with Firefly III.
+# π*10 seconds is usually fine.
+#
+CONNECTION_TIMEOUT=31.41
+
+# The following variables can be useful when debugging the application
+APP_ENV=local
+APP_DEBUG=false
+LOG_CHANNEL=stack
+
+#
+# If you turn this on, expect massive logs with lots of privacy sensitive data
+#
+LOG_RETURN_JSON=false
+
+# Log level. You can set this from least severe to most severe:
+# debug, info, notice, warning, error, critical, alert, emergency
+# If you set it to debug your logs will grow large, and fast. If you set it to emergency probably
+# nothing will get logged, ever.
+LOG_LEVEL=debug
+
+# TRUSTED_PROXIES is a useful variable when using Docker and/or a reverse proxy.
+# Set it to ** and reverse proxies work just fine.
+TRUSTED_PROXIES=
+
+#
+# Time zone
+#
+TZ=Europe/London
+
+#
+# Use ASSET_URL when you're running the data importer in a sub-directory.
+#
+ASSET_URL=
+
+#
+# Email settings.
+# The data importer can send you a message with all errors, warnings and messages
+# after a successful import. This is disabled by default
+#
+ENABLE_MAIL_REPORT=false
+
+#
+# Force Firefly III URL to be secure?
+#
+#
+EXPECT_SECURE_URL=false
+
+# If enabled, define which mailer you want to use.
+# Options include: smtp, mailgun, postmark, sendmail, log, array
+# Amazon SES is not supported.
+# log = drop mails in the logs instead of sending them
+# array = debug mailer that does nothing.
+MAIL_MAILER=smtp
+
+# where to send the report?
+MAIL_DESTINATION=gleb+fireflyiii@koval.net
+
+# other mail settings
+# These variables can be set from a file if you append it with _FILE
+MAIL_FROM_ADDRESS=no-reply@koval.net
+MAIL_HOST=smtp.mailtrap.io
+MAIL_PORT=587
+MAIL_USERNAME=no-reply@koval.net
+MAIL_PASSWORD=SMTP_PASSWORD_VALUE
+MAIL_ENCRYPTION=tls
+
+# Extra settings depending on your mail configuration above.
+# These variables can be set from a file if you append it with _FILE
+MAILGUN_DOMAIN=
+MAILGUN_SECRET=
+MAILGUN_ENDPOINT=
+POSTMARK_TOKEN=
+
+#
+# You probably won't need to change these settings.
+#
+BROADCAST_DRIVER=log
+CACHE_DRIVER=file
+QUEUE_CONNECTION=sync
+SESSION_DRIVER=file
+SESSION_LIFETIME=120
+IS_EXTERNAL=false
+
+REDIS_HOST=127.0.0.1
+REDIS_PASSWORD=null
+REDIS_PORT=6379
+
+# always use quotes
+REDIS_DB="0"
+REDIS_CACHE_DB="1"
+
+# The only tracker supported is Matomo.
+# This is used on the public instance over at https://data-importer.firefly-iii.org
+TRACKER_SITE_ID=
+TRACKER_URL=
+
+APP_NAME=DataImporter
+
+#
+# The APP_URL environment variable is NOT used anywhere.
+# Don't bother setting it to fix your reverse proxy problems. It won't help.
+# Don't open issues telling me it doesn't help because it's not supposed to.
+# Laravel uses this to generate links on the command line, which is a feature the data importer does not use.
+#
+APP_URL=http://localhost
diff --git a/infra/finance/firefly-iii/docker-compose.yaml b/infra/finance/firefly-iii/docker-compose.yaml
new file mode 100644
index 0000000..fc73c48
--- /dev/null
+++ b/infra/finance/firefly-iii/docker-compose.yaml
@@ -0,0 +1,42 @@
+version: "3"
+
+services:
+  app:
+    image: fireflyiii/core:latest
+    restart: unless-stopped
+    volumes:
+      - firefly_iii_upload:/var/www/html/storage/upload
+    env_file: .env
+    ports:
+      - 80:8080
+    depends_on:
+      - db
+  db:
+    image: mariadb:lts
+    restart: unless-stopped
+    env_file: .env
+    volumes:
+      - firefly_iii_db:/var/lib/mysql
+
+  importer:
+    image: fireflyiii/data-importer:latest
+    restart: unless-stopped
+    ports:
+      - 81:8080
+    depends_on:
+      - app
+    env_file: .importer.env
+
+  cron:
+    #
+    # To make this work, set STATIC_CRON_TOKEN in your .env file or as an environment variable and replace REPLACEME below
+    # The STATIC_CRON_TOKEN must be *exactly* 32 characters long
+    #
+    image: alpine
+    restart: unless-stopped
+    env_file: .env
+    command: sh -c "echo \"0 3 * * * wget -qO- http://app:8080/api/v1/cron/$STATIC_CRON_TOKEN\" | crontab - && crond -f -L /dev/stdout"
+
+volumes:
+  firefly_iii_upload:
+  firefly_iii_db:
diff --git a/inventory/proxmox.yaml b/inventory/proxmox.yaml
index ced713a..e38e2c4 100644
--- a/inventory/proxmox.yaml
+++ b/inventory/proxmox.yaml
@@ -23,6 +23,9 @@ proxmox:
             samba:
               hosts:
                 samba.srv.home.local.koval.net:
+            finance:
+              hosts:
+                finance.srv.home.local.koval.net:
           vars:
             ansible_user: debian
             ansible_ssh_private_key_file: ~/.ssh/id_rsa